Argox F1 Bedienungsanleitung PDF herunterladen (Seite 38)

Cleaning the Print Head

To keep the Print Head remain in the best conditions and

efficiency and to extend duration for use, regular cleaning action

is needed.

Note: Turn off the printer before cleaning.

Clean the print head as follows:

1. Turn off the printer.

2. Open the top cover to access the print head module

3. Remove the ribbon.

4. Rub the print head with a cotton bud moistened with

“Ethanol” or “IPA”.

5. Check for any traces of black coloring or adhesive on the

cotton after cleaning.

6. Repeat if necessary until the cotton is clean after it is

passed over the head.

Cleaning Interval

It’s strongly recommended to regularly clean print heads at least

when changing every one label roll (in direct thermal printing

mode) or every one ribbon roll (in thermal transfer printing mode).

In addition, if printers are operated under critical applications and

environments, or if it’s found that print quality is degraded, please

clean print heads more frequently.

Cleaning Material

Surface of print head’s heating element is very fragile. To prevent

from any possible damage, please use soft cloth/ cotton buds with

“Ethanol” or “IPA” to clean print head surface.

It’s strongly recommended to wear hand gloves during cleaning

progress.

Do not touch print head surface by bare hands or with any hard

equipment.

Water or spit should be kept away in case of corrosion on heating

elements.

Cleaning Direction

When cleaning the print head, always wipe in One-Way Direction

- from Left to Right only, or, from Right to Left only, to clean

“Heating Line” of print head gently without excessive stress.

Do not wipe back and forth

, to avoid dust or dirt on cleaning

cotton would be attached onto print head again.

Special Caution:

Warranty of print heads will be void if print head serial number is

removed, altered, defected, or made illegible, under every

circumstance.

Cleaning the Roller

Using a cotton bud moistened with alcohol, clean the roll and

remove any attached glue.

Note: Clean the roller after it has been in contact with foreign

materials such as dust or adhesives.

Cleaning the Media Compartment

Clean the media compartment with a cotton bud that has been

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 62 63

Kommentare zu diesen Handbüchern

Keine Kommentare

Argox F1 Bedienungsanleitung Seite 38

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Etikettendrucker Argox F1