Argox F1 Bedienungsanleitung PDF herunterladen (Seite 23)

SETTING

PRIORITY

COMMAND/

LCD PANEL

COMMAND Choosing priority of

LCD settings.

Ethernet settings and parameters

(X-2300E. X-2300ZE. X-3200E. X-3200ZE):

Item Range Factory

Default

Remarks

DHCP

DISABLE

ENABLE

If printer has been connected to a

router, IP address will be assigned

automatically by DHCP server after

power on.

If printer is not connected to a

router, with DHCP disabled,

settings of IP ADDRESS, SUBNET

MASK, and DEFAULT GATEWAY

settings will be available on LCD.

Every time when DISABLE is

changed to be ENABLE, LCD will

prompt “ETHERNET CARD

UPDATE FINISH…”

Then please reboot the printer.

IP ADDRESS xxx.xxx.xxx.xxx

SUBNET

MASK

xxx.xxx.xxx.xxx

DEFAULT

GATEWAY

xx.xxx.xxx.xxx

xxx range:0~255

When DHCP is disabled, default IP

address is 192.168.1.100.

If “_” sign appears, that means that

DHCP setting is disabled. On the

contrary, DHCP setting is enabled.

1. FEED/CONFIG. :

change contents.

(ex. from 000.000.000.000 to

255.255.255.255)

2. PAUSE/CALIBR. :

shift “_”sign position.

(ex. from 2

55.255.255.255 to

255.255.255.255

)

3. CANCEL/RESET.:

Select next function setting. (“_”

sign must at the third digit of each

parameter, for example, xxx

4. To change IP ADDRESS or

SUBNET MASK, enter DEFAULT

GATEWAY setting, press CANCEL

button once; LCD will prompt

“ETHERNET CARD UPDATE

FINISH…”

Then reboot the printer.

MAC

ADDRESS

yyyy-yyyy-yyyy

(yyyy = 0000~FFFF)

To have more information on Ethernet settings, please refer to

Ethernet User’s Guide.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 62 63

Kommentare zu diesen Handbüchern

Keine Kommentare

Argox F1 Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Etikettendrucker Argox F1