Argox F1 Bedienungsanleitung PDF herunterladen (Seite 45)

Rotary Cutter and Guillotine Cutter Installation

Refer to the following steps to install the cutter kit onto printers:

1. Turn off the printer.

2. Remove the top covers on both left and right sides.

3. Install the Cutter Baby Board to the main board JP17 socket of

X-1000VL, X-2000V, X-2000V Zip / JP15 socket of X-3200,

X-3200Z, X-3200E, X-3200ZE, X-2300E, X-2300ZE.

4. Loose the three screws from Tear-off Bracket and then remove

Tear Bracket.

screw

Tear Bracket

5. Insert the left side of cutter bracket (7) and secure the two

screws (6) to the print module.

Rotary Cutter

Guillotine Cutter

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 62 63

Keine Kommentare

Argox F1 Bedienungsanleitung Seite 45