97
Dispenser Installation
Install a dispenser into the printer as follows:
1. Turn off the printer.
2. Remove the top cover on both left and right sides.
3. Assemble the related components for both left and right
sides. Check below:
98
4.
Connect the Peeler sensor to main board JP15 socket of
X-1000VL, X-2000V, X-2000V Zip / JP12 socket of
X-3200, X-3200Z, X-3200E, X-3200ZE, X-2300E, and
X-2300ZE. Secure the dispenser board onto printer
case.
5. Insert the left side of dispenser bracket and secure the
three screws to the TPH module.
Kommentare zu diesen Handbüchern