Argox CP-3140E Bedienungsanleitung PDF herunterladen (Seite 16)

Compact Printer Series - User’s Manual

6. Close the printer module and then press firmly at the both sides to

properly latch it until you hear a click.

7. Rotate Thumb Wheel of Ribbon Pick-up Holder to remove slack

and ribbon wrinkle, and to align the ribbon on the spindles.

Thumb Wheel

Compact Printer Series - User’s Manual

3. Printer Operations

Printing Media Calibration & Configuration

Before connecting the printer to your computer, to make sure that

the printer works properly, conduct media calibration and print a

self-test/ configuration label.

Steps to Start Media Calibration & Configuration

1. Make sure the media is properly loaded and the top cover of

the printer is closed.

2. Turn off the printer power.

3. Press and hold the FEED button while turning on the power,

until printer motor is activated.

4. Media Calibration will be performed while the printer

automatically feeds the label stock for a certain length; then

the printer motor suspends for one second and then prints out

a configuration profile. Release the FEED button as soon as

printer starts to print.

Note:

If printer is with Argox PPLB printer language, printer will enter

Dump mode after printing configuration. In Dump mode, all

characters will be printed in 2 columns: the right shows characters

received from your system, and the left are the corresponding

hexadecimal values of the characters. It allows users or engineers

to verify and debug the program.

To return to normal operation mode from Dump mode, press the

FEED button again. Another way is to turn off printer power, and

then restart

rinter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Keine Kommentare

Argox CP-3140E Bedienungsanleitung Seite 16