Argox F1 Bedienungsanleitung PDF herunterladen (Seite 50)

Select or Adjust the Media Sensor

This printer uses two types of media sensors: See-through and reflective.

The default is see-through sensor No 1.

Select the See-through Sensor

The standard see-through sensor is in a fixed position and enabled from the

control panel. (Figure 23)

Figure 23

Adjust the Reflective Sensor

1. Press down the Thermal Print Head (TPH) release lever to release the print

head module.

2. Lift the print head module to expose the media sensor cover. (Figure 24)

3. Slide the media sensor until the reflective sensor aligns with the gap or

notch. (Figure 25)

Figure 24 Figure 25

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Keine Kommentare

Argox F1 Bedienungsanleitung Seite 50